The Best Strings for Santur and How to Replace Them
The santur is a traditional Middle Eastern instrument known for its mesmerizing, resonant sound, and its strings are the heart of its tonal quality. Whether you are re-stringing a Persian 9-Kharak santur or maintaining your daily instrument, selecting high-quality strings and installing them correctly is critical for stable tuning and clear tone.
Below is a complete guide on choosing the right string material and gauge, alongside a step-by-step video tutorial and a comprehensive tuning chart for your santur.
Video Tutorial: How to Replace Santur Strings Step-by-Step
Watch our detailed video guide from Delaram Music to learn how to prepare, loop, wind, and tune your new santur strings:
Video Chapter Breakdown (Key Moments):
- **** – Introduction & Preparing Your Tools
- **** – Removing Worn or Broken Santur Strings
- **** – Choosing the Right Material & String Gauge
- **** – Attaching the String Loop to the Hitch Pin
- **** – Threading and Winding the String on the Tuning Pegs
- **** – Final Tuning & Checking Bridge Position
How to Select the Best Strings for Your Santur
Choosing the correct strings depends on the register of the note (treble vs. bass), your instrument type, and sound preference. If you are looking to purchase high-quality replacement sets, explore our dedicated Santur Strings Collection.
1. String Material & Tonal Register
- Steel Strings (White / Treble Notes): High-carbon steel strings are used for the higher register (right bridges). They yield a bright, sharp, and sparkling tone capable of holding high tension without snapping.
- Brass or Phosphor Bronze Strings (Yellow / Bass Notes): Used for the lower register (left bridges). Phosphor bronze delivers a warm, rich, and deep bass response with strong corrosion resistance.
2. String Gauge (Thickness)
- Standard Gauge Range: Most standard Persian santurs use string diameters ranging from 0.18 mm to 0.20 mm (sometimes up to 0.25 mm for deep bass notes).
- Thin Gauges: Provide crispness and ease of tuning for upper octaves.
- Thick Gauges: Provide warmth, volume, and resonance for lower octaves.
3. Top Recommended Brands
- NoviinSim (نوین سیم): Extremely popular among professional players for its high tensile strength, precise thickness uniformity, and rust-resistant coating.
- Vahdati (وحدتی): Renowned for traditional tonal warmth and consistent clarity across courses.
Complete Persian Santur Tuning Chart (Santoor Tuning)
Tuning a 9-bridge (9-Kharak) Persian santur requires precision across all three positions (Yellow/Bass, White/Treble, and Behind-the-Bridge/Behind-Kharak). You can use a digital tuner or browse our selection of Musical Instrument Accessories & Tuning Tools to assist your tuning setup. Below is the standard tuning layout for the Shor (Sol / G pitch) tuning system:
| Kharak (Bridge) # | Position 1: Yellow Strings (Bass) | Position 2: White Strings (Treble) | Position 3: Behind Kharak (High) |
| Bridge 1 | E (Mi) | E (Mi) | E (Mi) |
| Bridge 2 | F (Fa) | F (Fa) | F (Fa) |
| Bridge 3 | G (Sol) | G (Sol) | G (Sol) |
| Bridge 4 | A (La) | A (La) | A (La) |
| Bridge 5 | B Koron / Flat (Si) | B Flat (Si) | B Flat (Si) |
| Bridge 6 | C (Do) | C (Do) | C (Do) |
| Bridge 7 | D (Re) | D (Re) | D (Re) |
| Bridge 8 | E (Mi) | E (Mi) | E (Mi) |
| Bridge 9 | F (Fa) | F (Fa) | F (Fa) |
Step-by-Step Guide: How to Replace Santur Strings
Restringing a santur requires patience. Follow these steps to ensure clean winding and long-lasting tuning stability:
Step 1: Gather Your Tools
- New Santur String Roll / Set (Matching gauge and material)
- Santur Tuning Wrench (Tuning Key)
- Wire Cutters & Pliers
- Soft Cleaning Cloth
Step 2: Remove the Old String
- Use the tuning wrench to slowly turn the tuning peg counter-clockwise until the tension is released.
- Unhook the looped end from the hitch pin on the left side and pull the string free from the peg.
Step 3: Loop the Hitch Pin Side
- Form a secure, small loop at one end of the new string (or use pre-looped strings).
- Anchor the loop onto the corresponding hitch pin on the left side of the santur casing.
Step 4: Thread and Wind on the Tuning Peg
- Pull the string taut across the soundboard, resting it on the hitch pins and bridges.
- Thread the free end into the hole of the corresponding tuning peg.
- Leave roughly 2–3 cm of slack before winding.
- Using the tuning key, rotate the peg while keeping firm tension with your hand to prevent overlapping or crossing.
Step 5: Tune and Trim
- Gradually bring the string up to pitch using an electronic tuner.
- Snip off excess wire near the peg with wire cutters to prevent buzzing or injuries.
Pro Tip: New strings stretch! Expect your new santur strings to go out of tune frequently during the first 3–5 days until the metal tension stabilizes. If you are also interested in exploring or buying a new instrument, check out our handcrafted Persian Santur Collection.
Essential Tips for Santur String Maintenance
- Wipe Down After Playing: Moisture and skin oils cause corrosion. Clean your strings with a dry microfiber cloth after every practice session.
- Avoid Sudden Temperature Shifts: Store your instrument in a protective hard case away from direct sunlight, drafts, and high humidity.
- Replace in Sets: Because santurs feature 4 strings per course (note), replacing all 4 strings together ensures equal tension and balanced acoustic resonance.
Frequently Asked Questions (FAQ)
A: For active players, full replacement is recommended every 12 to 18 months. If you notice rust, discoloration, or loss of sustain, replace them sooner.
A: No. Santur strings require specific gauges and tension characteristics engineered for multi-string course resonance and wooden soundboard tolerances.
A: Make sure the string is securely anchored at the hitch pin and wound tightly around the peg without overlapping. If the wooden peg itself is slipping, use peg compound or adjust its seating in the soundboard hole.can ensure your santur continues to produce its enchanting sound for years to come.

